Specialty services in McKinney for green pools, salt systems, automation and sand changes. One licensed local team handles all of it.
Some pool jobs don’t fit a weekly visit. A pool that turned green after a storm, a salt cell caked with calcium, an old controller that won’t connect to your phone, or a sand filter that quit filtering all need more than skimming and brushing. Our specialty services cover those jobs, handled by the same family-owned team that has worked on McKinney pools for more than ten years.
Because salt systems and automation involve electrical work, they need a licensed tech. Texas requires a TDLR license for pool electrical work like pumps, heaters, lights and automation. We hold Residential Appliance Installation Contractor License #1066, owner Robert Pierce holds installer license #448687, and you can check both on the TDLR license search.
Most of these problems show up at the equipment pad first, so they’re easy to spot. Call us when:
Each one has its own service below. Still not sure which you have? Describe it on the phone and we’ll sort it out.
Every specialty job starts the same way:
After a specialty job, a weekly pool cleaning plan keeps the pool from sliding back.
We treat the water, brush the walls and floor, clean the filter and vacuum the pool until it’s swimmable again. Many pools clear within 24 to 72 hours, and most don’t need draining. See green to clean.
Once it’s installed, you can run your pump, heater, lights and spa from your phone. We install and repair Pentair, Jandy and Hayward automation, including upgrades for older pools. See pool automation.
Salt cell cleaning and scale removal, salt system repairs and conversions from chlorine to salt. McKinney’s hard water scales salt cells over time, and a clean cell keeps chlorine production steady. See salt systems.
Filter sand usually lasts about five to 15 years. When it is time for a change, we also inspect the laterals and standpipe, clean out the tank and refill it with manufacturer-approved sand. See sand changes.
North Texas storm season is hard on water. Heavy rain dilutes chlorine, wind blows in debris, and a power outage can leave the pump off for hours. In summer heat, that’s often enough to turn a clear pool green. Our guide on why a pool keeps turning green covers the usual causes.
Hard water is the other local problem. Calcium builds up on salt cells as they make chlorine, so a scaled cell produces less of it. That’s why regular cell cleaning keeps a salt pool from sliding toward algae.
Spring pollen and summer debris also work sand filters hard. Over the years, the sand wears smooth and stops trapping fine particles, which is when a sand change pays off.
Specialty work is one part of what we do. The same team cleans pools every week and repairs or replaces the equipment that keeps them running.
Weekly cleaning plans from $100 a month, with water testing, chemical balancing and a report after every visit.
Pumps, heaters, filters and spas. We explain what's wrong before we fix anything and can usually get there the same or next day.
When a pump, heater, light or filter is past saving, we install a right-sized replacement from Hayward, Pentair, Jandy or Zodiac.
See everything we do for McKinney pools, from weekly visits to repairs, new equipment and green pool recovery.
Straight answers to the questions we hear most about green pools, salt systems, automation and sand changes. If yours isn’t here, call (469) 884-4022.
Yes. Sparkling Clear gives free quotes on all of our specialty services, from green pools to salt systems, automation and sand changes. We take a quick look at the pool and equipment, then give you a price. There's no contract to sign, so you can decide once you see the number.
Start with what you see. Green, murky water usually means algae. A salt pool that can't keep its chlorine up may have a scaled cell. A sand filter that won't clear the water may need fresh sand. Not sure? Call (469) 884-4022, and we'll take a quick look and tell you.
For many owners, yes. A salt system makes chlorine from the salt in the water, so you stop buying and adding chlorine by hand, and the water feels softer. Still, the cell scales up in McKinney's hard water and needs regular cleaning.
Heat and sun work against pool water. Sunlight can destroy half the chlorine in unstabilized water in under an hour, warm water speeds up algae, and hot water scales more easily. That's why summer is when green pools and scaled equipment tend to show up around McKinney.
Yes. The salt cell makes chlorine, but the water still needs pH, alkalinity, stabilizer and calcium kept in range, plus salt added now and then. Salt pools also tend to drift up in pH. Testing and balancing every visit keeps the cell and the pool surface protected.
Yes. Salt cell cleaning can be added to a weekly plan, and after a green to clean job, a weekly or chemical-only plan keeps the pool from sliding back. Mention any specialty work when you call (469) 884-4022, and we'll price it alongside your plan.
Yes, with an automation system. Once it's installed, an app lets you set pump schedules, turn on the heater or spa before you get home and change the lights. Pentair, Jandy and Hayward all make app-based systems, and we install and program all three.
Yes. When an older controller stops getting parts or support, we can replace it with a current Pentair, Jandy or Hayward system and reconnect your existing equipment. We also repair older systems when a fix still makes sense.
Often, yes. Algae clogs the filter and shortens filter runs, scale builds up inside heaters and filters, and a pump pulling through a clogged filter has to work harder. Small problems usually cost less to fix early, so call Sparkling Clear at (469) 884-4022 as soon as you notice a change.
Often. Old sand that's packed down or full of calcium can cause both cloudy water and high pressure. If the sand isn't the problem, we check for broken laterals, a stuck valve or chemistry issues instead. See our sand changes page for the full process.
