Pool repair in McKinney from a TDLR-licensed, family-owned team. We find the problem, tell you the price and can usually fix it the same or next day.
When a pump quits or a heater won’t fire, you want someone nearby who can find the problem fast. Sparkling Clear has worked on McKinney pools for more than ten years, and because we’re based here, we can usually reach repair calls the same or next day, depending on the season.
Owner Robert Pierce still answers the phone and trains every technician. Texas requires a TDLR license for pool electrical work like pumps, heaters, lights and automation. We hold Residential Appliance Installation Contractor License #1066, Robert holds installer license #448687, and you can check both on the TDLR license search.
Every repair call follows the same path:
There’s no contract to sign and no surprise charge at the end. You approve the price, and then we do the work.
A repair usually makes sense when the equipment is still fairly young and the fix costs well under half the price of a new unit. Pumps often last eight to twelve years, and gas heaters about seven to twelve, so age matters. Replacement starts to win when:
We’ll show you both numbers and let you choose. If replacing is the better call, our pool equipment installation team sizes the new unit to your pool.
Cracked tanks, leaking lids, broken laterals and pressure that won’t come down after a cleaning. We repair cartridge, DE and sand filters, and hard water calcium in the filter media is a common cause of trouble here. See pool filter repair.
Gas heaters that won’t light and heat pumps that run without heating. We work on Hayward, Pentair, Raypak and Jandy heaters, including natural gas, propane and heat pump models. See pool heater repair.
Pumps that hum, leak, lose prime or won’t start. Many only need a new seal, capacitor or motor, so we check that before talking about a new pump. See pool pump repair.
Spa pumps, heaters, jets, controls and circulation problems. Attached spas share equipment with the pool, so we check both while we’re there. See spa repair.
Summer brings the most pump calls. Pumps run long hours in the heat, and worn seals and bearings tend to give out in July and August, right when you need the pool most.
Hard water is behind a lot of heater and filter repairs. Calcium scale builds up inside heat exchangers and in filter media, so heaters struggle and filter pressure climbs. Balanced water slows that down, which is one reason a weekly pool cleaning plan helps your equipment last.
Spring storms fill baskets with debris, and a pump starved of water can lose prime or run dry. After a hard freeze, we also see cracked pump housings and filter tanks on pools where the pump was off overnight.
Repairs are one part of what we do. The same team cleans pools every week and installs new equipment when a repair no longer makes sense.
Weekly cleaning plans from $100 a month, with water testing, chemical balancing and a report after every visit.
See everything we do for McKinney pools, from weekly visits to repairs, new equipment and green pool recovery.
When a pump, heater, light or filter is past saving, we install a right-sized replacement from Hayward, Pentair, Jandy or Zodiac.
Green to clean recovery, pool automation, salt system service and sand changes for sand filters.
Straight answers to the questions we hear most about pool repairs. If yours isn’t here, call (469) 884-4022.
It depends on what failed. A new pump seal or capacitor costs far less than a heater control board or a new motor. Sparkling Clear finds the cause first and gives you a firm price before any work starts, so you can decide on repair or replacement with real numbers.
Often, yes. McKinney is our home base, so we can usually reach repair calls the same or next day, depending on the season. Summer is the busiest time, so call early in the day. If your pump is down, turn off the breaker until we get there.
Yes. A tech checks the equipment, finds the cause and gives you a price before any work begins. You approve it, and then we do the repair. There's no contract and no surprise charge when the job is done.
Usually water chemistry or flow. Corrosive water, often caused by low pH, attacks the metal in pumps, heaters, piping and valves, and scaling water coats heaters and filters. Full baskets and dirty filters choke the flow, so the pump works harder. Balanced water and clean baskets head off a lot of pool pump repair calls.
Sometimes. Policies often cover sudden damage, like a tree falling on equipment or a lightning strike, but usually not normal wear, old age or freeze damage that could have been prevented. Check your policy, and we can document what failed for your claim.
The calls we get most are pumps that won't prime or hum without starting, heaters that won't light, filters stuck at high pressure, and leaking pump seals or filter lids. In McKinney, hard water scale and long summer run times are behind a lot of them.
A plumber can handle some pipe work, but pool pumps involve electrical work near water. Texas requires a TDLR license for pool electrical work like pumps, heaters, lights and automation. Sparkling Clear holds TDLR license #1066 and repairs pumps, motors and the controls that run them.
Yes. We repair Hayward, Pentair, Jandy and Zodiac equipment, plus Raypak heaters. That covers single-speed and variable-speed pumps, gas and heat pump heaters, and cartridge, DE and sand filters. We use manufacturer-approved parts.
Start with the basics. Make sure the breaker and timer are on, the skimmer and pump baskets are empty, the valves are open and the water sits at the middle of the skimmer. If the equipment still hums, leaks, won't prime or won't heat, switch it off and call Sparkling Clear at (469) 884-4022.
It's safest to stay out. Without the pump, the water isn't filtered and chlorine doesn't mix through the pool, and in summer heat some algae can turn a clear pool green in less than a day. Skim out what you can and call Sparkling Clear at (469) 884-4022 to get it running again.
