A swimming pool is a wonderful addition to any home. It’s a healthy outlet for exercise and the perfect setting for hosting parties throughout the summer. Yet, owning a pool can be costly, especially when considering the ongoing maintenance, repairs, and energy costs. So, if there were ways to reduce your pool’s energy usage and create an overall more efficient pool system, wouldn’t you be interested? If so, you’ve come to the right place. A little bit of swimming pool maintenance in McKinney, TX can help you to save money and energy around the pool.
Swimming Pool Energy Saving Tips
- Avoid running the pool filter pump as frequently
You may already have a time clock on your filter pump since, for most pools, 24/7 operation is unnecessary and wasteful. During the cooler months, you can cut back on pump run time even more, all without sacrificing water quality or increasing chemical usage. Play around with the time clock, reducing daily run time, until you notice the water quality begin to suffer. Then add on an hour or two. - Turn down the pool heater
One of the most expensive pool energy costs stems from keeping the pool water at a warm temperature. If you don’t want to dive into icy water, there is a good way to compromise on energy costs and a pleasant temperature. Consider turning down the heater during the week, then turning it back up for weekend enjoyment. Make sure your pool heater is energy-efficient, too. Consider using a pool heat pump or solar heater, or even both of them together to utilize energy savings. - Cover the pool
Using a solar pool cover, as tedious as they can be, can save you big when it comes to heating costs. Solar covers also work to reduce evaporative water loss by as much as 95 percent. Just as you have a roof on your home to help keep in the heat, ensure your pool has a smart cover to retain the warm temperature. - Upgrade to a variable speed pool pump
While a single speed pump is set to a constant speed, a variable speed pool pump allows you to change the speed levels. This means you can set your pump to the lowest speed at night to maintain good filtration, and then use the other speeds as needed when cleaning or heating. The ability to control pump speed gives you the ability to control energy use. - Switch out your pool lights
A typical 500 watt pool light bulb consumes 0.50 kilowatts of electricity per hour of operation. If you run the lights for three hours at night, that would use 10.5 kWh per week. LED pool lights are a smart switch to make, which come with bulbs using as little as 14 watts, consuming only 0.1 kilowatts of electricity per hour. While this may be a small switch, you can save plenty of energy and money in the long run. - Keep it clean
Pool maintenance may not be fun and some homeowners don’t have the time to keep up with it, but it is essential if you want to save energy around the pool. A clean pool means good water flow, while a dirty pool makes systems work harder and use more energy. In turn, this can wear out your pool equipment faster, causing more repairs down the line. If you don’t have time to keep the pool clean, consider hiring the pool maintenance professionals.
Are you looking for innovative ways to save energy around the pool throughout fall and beyond? Allow the professionals to help. At Sparkling Clear Pool Service, we understand what it takes to keep a pool clean, sanitary, and well-maintained. Be sure to contact us on 214-361-0255 for all of your pool maintenance needs in McKinney, Allen, Frisco, and beyond.